Experimental and Production Enterprise "Ferrit" offers consumers magnetic laboratory separators SMB-ST2 series under a manufacturing agreement and is looking for partners to conclude under a distribution services agreement.

Experimental and Production Enterprise "Ferrit" manufactures magnetic laboratory separators of the SMB-ST2 series, designed for dry extraction (separation) of highly magnetic minerals from the material of crushed geological samples, separation of granular mineral materials with significant differences in magnetic susceptibility (for magnetic enrichment), extraction of magnetite ores from geological samples.

Principle of operation:
The basis of the operation of the magnetic separator is the principle of separating the separated product by magnetic properties using an internal magnetic drum. This drum is mounted motionless on the frame. The outer drum of larger diameter - the shell, made of stainless steel, is driven by a gear motor. The separated material is fed through the feed mouth directly to the rotating shell of the drum, which has longitudinally vertical cut-off plates. Getting into the zone of action of a powerful magnetic field, ferromagnetic particles are attracted to the surface of the drum shell and are held on it until the shell cutter, which moves such particles, passes through the magnetic sector. Further, the magnetic field disappears, and the ferromagnetic particles are separated from the shell under the action of their own weight. Thus, the cleaned material falls and the trapped ferromagnetic particles fall into the metal collector.

Magnetic laboratory separators of the SMB-ST2 series are equipped with:
- adjustment of the speed of rotation of the drum by an inverter (frequency converter);
- supply of material by a vibrating feeder with adjustable feed rate.

Specifications:

Material for magnetic separation	dry crushed geological samples
Size of material to be separated	0,4-5,0 mm
Humidity of the separated material	no more than 1%
Separated material temperature	no more than +60°C
Rated capacity	about 2 dm3/h
Magnetic induction	70-400(±10%) mT
Nominal width of the working magnetic zone	40-50 mm
Temperature mode of operation	no more than 60°С
Separator drive power supply	AC,220/230 V,50Hz
Type of material to be separated	bottom feed
Hopper volume	not less than 0.5 l
Power consumption	no more than 0.5 kW
Dimensions	no more than 1000x500x800 mm
Weight of magnetic separator	no more than 150 kg

Areas of use:
- purification of materials from highly magnetic impurities (quartz sand, glass raw materials, white electrocorundum, refractories, tungsten-cobalt powders (for powder metallurgy), products of processing tires and nickel-cadmium batteries, etc.);
- beneficiation of fine-grained magnetite ore to obtain high-quality iron concentrate;
- enrichment of cobalt-containing slags.

Enterprise "Ferrit" offers partners:
*a magnetic laboratory separators SMB-ST2 series under a manufacturing agreement;
*a magnetic laboratory separators SMB-ST2 series under a distribution services agreement.

Link to the video with the work of this separator
More details can be found at the link(in Russian)

In the manufactured separators of the SMB-ST2 series, the magnetic induction can reach 400 mT, in similar separators PBSTS 30/5 the maximum magnetic induction is 130 mT (the higher the magnetic induction, the stronger the effect of the magnet at a given point, and the better it can hold ferromagnetic particles in this point).

Possibility to produce non-standard magnetic separator according to your requirements.

The unique scientific developments of the enterprise, high design and technological level, cooperation with leading research organizations of the Republic of Belarus, as well as the use of the latest materials and technologies make it possible to compete with the world's leading manufacturers of similar products and equipment.

During the existence of the organization, it has managed to take one of the leading positions in the CIS countries and Eastern Europe in the production of permanent magnets, ferrites, as well as products based on them. During this time, the enterprise has manufactured and delivered to customers thousands of tons of permanent magnets, hundreds of models of magnetic separators for enterprises of specialized industries in Belarus, Ukraine, Russia, Poland, Latvia, Lithuania, Estonia, Moldova, and the countries of the Middle East region.

The enterprise's products - magnetic separators, permanent magnets, ferrites, radio electronic products - meet the technical requirements, scale and economic criteria of customers.

The experience accumulated the enterprise, combined with a focus on advanced world technologies and design solutions, allows the enterprise to offer a wide range of models of magnetic separators and metal detectors that can effectively solve the problems of enrichment of raw materials, detection and extraction of metal impurities from raw materials and finished products of customers.

When designing magnetic systems, scientists and specialists of the enterprise use mathematical modeling, using the latest computer programs, both to calculate the requirements for the synthesis of permanent magnets and to analyze the required configuration of the magnetic field.

Scientists and specialists of the enterprise study the processes of magnetic separation in the physico-technological laboratory. The specialized design and technology bureau the enterprise develops both new models of magnetic separators and new models of radio-electronic products. Quality control of products is carried out in a certified laboratory.

Consumers interested in purchasing magnetic laboratory separators SMB-ST2 series under a manufacturing agreement.

Partners interested in purchasing magnetic laboratory separators SMB-ST2 series under a distribution service agreement.