Located in Belarus Experimental and Production Enterprise "Ferrit" offers consumers magnetic drum separators of the SMB-ST1 series under manufacturing agreement and seeks distribution services partners outside Belarus.

Experimental and Production Enterprise "Ferrit" manufactures magnetic drum separators of the SMB-ST1 series, designed to remove ferromagnetic particles from the flow of separated material (food, plastic raw materials (including recycling), bulk building materials, etc.) when their content is significant.

Magnetic drum separators of the SMB-ST1 series are installed as independent equipment in the production line at the places of material transfer.

Principle of operation:
The basis of the operation of the magnetic separator is the principle of separating the separated product by magnetic properties using an internal magnetic drum in a sector design. The magnetic system inside the magnetic drum is made in the form of a sector with a sweep angle from 120° to 180°, the position of which is fixed. This drum is mounted motionless on the frame. The outer drum of larger diameter - the shell, made of stainless steel, is driven by a gear motor. The separated material is fed through the loading neck directly to the rotating shell of the drum, which has longitudinally vertical cut-off plates. Getting into the zone of action of a powerful magnetic field, ferromagnetic particles are attracted to the surface of the drum shell and are held on it until the shell cutter, which moves such particles, passes through the magnetic sector. Further, the magnetic field disappears, and the ferromagnetic particles are separated from the shell under the action of their own weight. Thus, the cleaned material falls and the trapped ferromagnetic particles fall into the metal collector.

Specifications:

Fraction of separated material	from 0.01 to 40 mm
Humidity of the separated material	up to 5%
Performance	up to 30 m3/h
Magnetic induction on the surface of magnetic blocks (at t=20°C)	from 150 to 1500 mT
Maximum operating temperature	up to +120°C
Cleaning the magnetic separator	automatic
Period of stability of magnetic properties	at least 10 years

Technical parameters can be changed at the request of the customer in accordance with the specific conditions for installing the separator in an existing production line.

Areas of use:
- in the glass, woodworking, construction, food industries;
- at enterprises for the production and processing of plastics and secondary raw materials.

Enterprise "Ferrit" offers partners:
*a magnetic drum separators of the SMB-ST1 series under a manufacturing agreement;
*a magnetic drum separators of the SMB-ST1 series under a distribution services agreement.

More details can be found at the link( in Russian)

In the manufactured separators of the SMB-ST1 series, the magnetic induction can reach 1500 mT, in similar separators of the AMT&C group of companies, the maximum magnetic induction is 900 mT (the higher the magnetic induction, the stronger the effect of the magnet at a given point, and the better it can hold ferromagnetic particles in this point).

In the manufactured separators of the SMB-ST1 series, the maximum temperature can be 120°C, magnetic induction 1500 mT; in a similar DS0404 separator from Rowland Magnetic Solution, the maximum temperature is only 60°C, the maximum magnetic induction is 600 mT.

No energy consumption for excitation of the magnetic field.

Possibility to produce non-standard magnetic separator according to your requirements.

The unique scientific developments of the enterprise, high design and technological level, cooperation with leading research organizations of the Republic of Belarus, as well as the use of the latest materials and technologies make it possible to compete with the world's leading manufacturers of similar products and equipment.

During the existence of the organization, it has managed to take one of the leading positions in the CIS countries and Eastern Europe in the production of permanent magnets, ferrites, as well as products based on them. During this time, the enterprise has manufactured and delivered to customers thousands of tons of permanent magnets, hundreds of models of magnetic separators for enterprises of specialized industries in Belarus, Ukraine, Russia, Poland, Latvia, Lithuania, Estonia, Moldova, and the countries of the Middle East region.

The enterprise's products - magnetic separators, permanent magnets, ferrites, radio electronic products - meet the technical requirements, scale and economic criteria of customers.

The experience accumulated the enterprise, combined with a focus on advanced world technologies and design solutions, allows the enterprise to offer a wide range of models of magnetic separators and metal detectors that can effectively solve the problems of enrichment of raw materials, detection and extraction of metal impurities from raw materials and finished products of customers.

When designing magnetic systems, scientists and specialists of the enterprise use mathematical modeling, using the latest computer programs, both to calculate the requirements for the synthesis of permanent magnets and to analyze the required configuration of the magnetic field.

Scientists and specialists of the enterprise study the processes of magnetic separation in the physico-technological laboratory. The specialized design and technology bureau the enterprise develops both new models of magnetic separators and new models of radio-electronic products. Quality control of products is carried out in a certified laboratory.

Consumers interested in purchasing magnetic drum separators of the SMB-ST1 series under a manufacturing agreement.

Partners interested in purchasing magnetic drum separators of the SMB-ST1 series under a distribution service agreement.