Институт порошковой металлургии им. академика О.В. Романа
http://pminstitute.by
220005 Минск, ул. Платонова 41
http://pminstitute.by
220005 Минск, ул. Платонова 41
Ceramic foam filters for purification of metal melts
COUNTRY OF ORIGIN
IDENTIFIER
BO5803PUBLISHED
2022-11-10LAST UPDATE
2022-11-11DEADLINE
Linked profile in other language
Responsible
Anton Sedelnik
+375 17 290 9873
otdel35@pminstitute.by
+375 17 290 9873
otdel35@pminstitute.by
Summary
O.V. Roman Powder Metallurgy Institute offers consumers ceramic foam filters for purification of metal melts under a manufacturing agreement or the transfer of manufacturing technology under a license agreement and is looking for partners to conclude a distribution services agreement.
Description
The production of ceramic foam filters for purification of metal melts has been mastered at the O.V. Roman Powder Metallurgy Institute.
Cellular ceramic foam has an arch-labyrinth pore structure, consisting of a system of interconnected cells.
Feature of cellular ceramic foam - extremely high porosity and permeability, high structural rigidity, low density.
Possible compositions of ceramic foam: mullite-corundum, corundum, zirconium dioxide.
The main characteristics of the material:
* Open porosity - 75..85%;
* Bending strength - 1..5 MPa;
* Maximum operating temperature - 1 550 ºС;
* Average pore size - 1..5 mm;
* Viscosity coefficient of permeability - 10e-9..10e-8 m2;
* The maximum linear size - 180 mm;
* Thickness - 10..25 mm.
Technologies for producing cellular ceramic foam filters for cleaning have been developed:
- Aluminum and its alloys
Metal pouring temperature up to 900ºС.
- Gray and ductile iron.
Metal pouring temperature up to 1500ºС.
- Heat-resistant alloys and steels.
Metal pouring temperature up to 1700ºС.
Cellular ceramic foam has an arch-labyrinth pore structure, consisting of a system of interconnected cells.
Feature of cellular ceramic foam - extremely high porosity and permeability, high structural rigidity, low density.
Possible compositions of ceramic foam: mullite-corundum, corundum, zirconium dioxide.
The main characteristics of the material:
* Open porosity - 75..85%;
* Bending strength - 1..5 MPa;
* Maximum operating temperature - 1 550 ºС;
* Average pore size - 1..5 mm;
* Viscosity coefficient of permeability - 10e-9..10e-8 m2;
* The maximum linear size - 180 mm;
* Thickness - 10..25 mm.
Technologies for producing cellular ceramic foam filters for cleaning have been developed:
- Aluminum and its alloys
Metal pouring temperature up to 900ºС.
- Gray and ductile iron.
Metal pouring temperature up to 1500ºС.
- Heat-resistant alloys and steels.
Metal pouring temperature up to 1700ºС.
Advantages and Innovations
The effectiveness of the use of cellular ceramic foam filters:
Foundry marriage (sand and slag inclusions, pores) of gray cast iron castings when casting in raw sand-clay molds is 14-20%. After using cellular ceramic foam filters with a pore size of 2-3 mm, the level of casting rejects is reduced to 3-4%.
Foundry marriage (sand and slag inclusions, pores) of gray cast iron castings when casting in raw sand-clay molds is 14-20%. After using cellular ceramic foam filters with a pore size of 2-3 mm, the level of casting rejects is reduced to 3-4%.
Stage of development
Already on the market
Funding source
State budged
Internal
Internal
IPR status
Exclusive rights
Patents granted
Secret know-how
Patents granted
Secret know-how
Comments regarding IPS status
Patent rights are protected in the CIS countries.
Sector group
Aeronautics, Space and Dual-Use Technologies
Maritime Industry and Services
Materials
Mobility
Maritime Industry and Services
Materials
Mobility
Organization information
Type
R&D institution
Year established
1972
NACE keywords
C.24.33 - Cold forming or folding
C.25.50 - Forging, pressing, stamping and roll-forming of metal; powder metallurgy
M.72.19 - Other research and experimental development on natural sciences and engineering
M.74.90 - Other professional, scientific and technical activities n.e.c.
C.25.50 - Forging, pressing, stamping and roll-forming of metal; powder metallurgy
M.72.19 - Other research and experimental development on natural sciences and engineering
M.74.90 - Other professional, scientific and technical activities n.e.c.
Turnover (in EUR)
10-20M
Already engaged in transnational cooperation
Yes
Additional comments
Fields of activity of the Institute.
Basic Research:
- development of scientific principles for controlling the properties of composite powder materials on a metal basis with inclusions of a hard (soft) phase using computer simulation of their macrostructure and behavior under conditions of external force and temperature influences;
- development of scientific principles for the creation and methods for controlling the structure and properties of nanostructured composite materials for various functional purposes;
- development of scientific bases for the creation of permeable materials with an organized structure, obtained by powder metallurgy methods for combustion, filtration and catalysis;
- study of heat and mass transfer processes in porous powder materials with an irregular pore structure;
- development of scientific bases for obtaining composite powders of a given chemical and phase composition by mechanical alloying, granulation, self-propagating high-temperature synthesis (SHS) and applying functional protective coatings from powder materials;
- study of the mechanism of hardening of thermally sprayed composite coatings during treatment with highly concentrated energy flows;
- mathematical modeling of the process of formation of deformations and stresses in a welded structure;
- development of theoretical and technological foundations for obtaining economically alloyed welding materials and components for their production;
- study of metallurgical, thermal deformation processes during high-speed plastic deformation of materials to obtain welded joints and materials (friction stir welding);
- carrying out fundamental scientific research on the impact of pulsed processes on various materials, the interaction of compact and discrete powder bodies at various loading rates, including due to the energy of explosives;
- development of a mathematical and computer model of the interaction of a melt particle with a solid surface under conditions of changing environmental parameters and properties of the formed coatings;
Applied research:
- development and implementation of new technological processes, materials and equipment in the field of creating functional ceramics, porous materials for various purposes, layered and cast composite materials using high pressures and various loading rates;
- development of powder low-alloy steels with a nanosized dispersed structure of the ferrite-martensite type, obtained using the mechanisms of interparticle and intergranular sliding in the processes of pressing and heat treatment and the production of products from them;
- obtaining nano-sized additives based on aluminum, copper, silicon, manganese, chromium, phosphorus, carbon and other elements by mechanical activation, SHS, hydrothermal synthesis;
- obtaining capillary-porous powder materials with an irregular pore structure based on copper, nickel, titanium, aluminum to intensify heat and mass transfer processes in cooling systems for new electronic devices, components of personal computers, laptops;
- obtaining highly efficient porous and highly porous cellular materials with functional coatings by creating a composite microstructure such as metal-ceramic, polymer-ceramic, ceramic-ceramic, (filter elements, membranes) for energy-saving processes for cleaning liquids and gases;
- production of hard alloys with the introduction of nanocrystalline carbides and oxides of transition metals for the manufacture of shaping tools;
- development of technologies for obtaining carbon-carbon materials and products from them;
- study of processes of high-speed plastic deformation of materials during friction stir welding;
- development of new composite powder materials with high performance properties of high-density, capillary-porous, wear-resistant, radio-absorbing, heat-shielding, etc.
Basic Research:
- development of scientific principles for controlling the properties of composite powder materials on a metal basis with inclusions of a hard (soft) phase using computer simulation of their macrostructure and behavior under conditions of external force and temperature influences;
- development of scientific principles for the creation and methods for controlling the structure and properties of nanostructured composite materials for various functional purposes;
- development of scientific bases for the creation of permeable materials with an organized structure, obtained by powder metallurgy methods for combustion, filtration and catalysis;
- study of heat and mass transfer processes in porous powder materials with an irregular pore structure;
- development of scientific bases for obtaining composite powders of a given chemical and phase composition by mechanical alloying, granulation, self-propagating high-temperature synthesis (SHS) and applying functional protective coatings from powder materials;
- study of the mechanism of hardening of thermally sprayed composite coatings during treatment with highly concentrated energy flows;
- mathematical modeling of the process of formation of deformations and stresses in a welded structure;
- development of theoretical and technological foundations for obtaining economically alloyed welding materials and components for their production;
- study of metallurgical, thermal deformation processes during high-speed plastic deformation of materials to obtain welded joints and materials (friction stir welding);
- carrying out fundamental scientific research on the impact of pulsed processes on various materials, the interaction of compact and discrete powder bodies at various loading rates, including due to the energy of explosives;
- development of a mathematical and computer model of the interaction of a melt particle with a solid surface under conditions of changing environmental parameters and properties of the formed coatings;
Applied research:
- development and implementation of new technological processes, materials and equipment in the field of creating functional ceramics, porous materials for various purposes, layered and cast composite materials using high pressures and various loading rates;
- development of powder low-alloy steels with a nanosized dispersed structure of the ferrite-martensite type, obtained using the mechanisms of interparticle and intergranular sliding in the processes of pressing and heat treatment and the production of products from them;
- obtaining nano-sized additives based on aluminum, copper, silicon, manganese, chromium, phosphorus, carbon and other elements by mechanical activation, SHS, hydrothermal synthesis;
- obtaining capillary-porous powder materials with an irregular pore structure based on copper, nickel, titanium, aluminum to intensify heat and mass transfer processes in cooling systems for new electronic devices, components of personal computers, laptops;
- obtaining highly efficient porous and highly porous cellular materials with functional coatings by creating a composite microstructure such as metal-ceramic, polymer-ceramic, ceramic-ceramic, (filter elements, membranes) for energy-saving processes for cleaning liquids and gases;
- production of hard alloys with the introduction of nanocrystalline carbides and oxides of transition metals for the manufacture of shaping tools;
- development of technologies for obtaining carbon-carbon materials and products from them;
- study of processes of high-speed plastic deformation of materials during friction stir welding;
- development of new composite powder materials with high performance properties of high-density, capillary-porous, wear-resistant, radio-absorbing, heat-shielding, etc.
Languages spoken
English
Russian
Russian
Information about partnership
Type of partnership considered
Distribution services agreement
License agreement
Manufacturing agreement
License agreement
Manufacturing agreement
Type and role of partner sought
Consumers interested in purchasing ceramic foam filters for purification of metal melts under a manufacturing agreement or transfer of manufacturing technology under a license agreement.
Partners interested in purchasing ceramic foam filters for purification of metal melts under a distribution services agreement.
Partners interested in purchasing ceramic foam filters for purification of metal melts under a distribution services agreement.
Type and size of partner sought
251-500
SME 51-250
SME 11-50
SME <= 10
R&D Institution
Sole proprietor
SME 51-250
SME 11-50
SME <= 10
R&D Institution
Sole proprietor
Attachments
Просмотров: 1097
Статистика ведется с 10.11.2022 15:41:25
Статистика ведется с 10.11.2022 15:41:25