The State Enterprise "Konus" offers services for hot-dip galvanizing of metal products
COUNTRY OF ORIGIN
IDENTIFIER
BO3898PUBLISHED
2021-05-19LAST UPDATE
2021-05-20DEADLINE
Linked profile in other language
Responsible
Sergei Burakevich
+375154605023
market_konus@mail.ru
+375154605023
market_konus@mail.ru
Summary
The State Enterprise "Konus" offers services for hot-dip galvanizing of metal products under a subcontract or outsourcing agreement.
Description
The "Konus" offers services in hot-dip galvanizing of metal products for customers from Belarus, Russia, and other CIS countries and neighboring countries. The plant performs galvanizing of large and lengthy structures, road fenders, lighting masts, cable support systems, products made of sheet metal, etc. It carries out the refinement of products before galvanizing, packaging of galvanized products, delivery by its own transport.
The "Konus" plant produces hot-dip galvanizing of products using modern equipment of the Italian company "Gimeko" using the latest technology. Thorough preparation of the steel surface, including degreasing using surfactants, pickling, washing, and fluxing, guarantees European quality coating.
Galvanization is carried out both externally and internally. The high-tech new equipment allows galvanizing of unique structures weighing up to 6 tons after individual processing of the order by technologists. Overall dimensions of the galvanizing bath: (length x width x height) 15 × 1.8 × 3.5 m. The thickness of the zinc coating: from 40 to 200 microns.
The main stages of the process:
1. Reception and suspension of ferrous metal structures
Metal structures must be delivered in batches with steel-grade indications and must meet the required criteria.
2. Chemical preparation of metal structures
2.1 Degreasing
The degreasing process is designed to remove grease stains, oils and other synthetic impurities from the surface of the "black" metal structures that slow down and worsen the etching process.
2.2 Flushing
Rinsing after degreasing is carried out in order to remove fat droplets from metal structures. Prevention of their entry into pickling baths.
2.3 Etching
Preparation of metal surface for galvanizing. The pickling process is designed to remove rust and scale. The surface of the steel is activated without damaging it.
2.4 Flushing
Washing after etching is necessary to remove iron chloride residues from the surface of metal products and to prevent the transfer of hydrochloric acid solution to the fluxing bath.
2.5 Fluxing
The process of applying a protective layer to the surface of metal structures. Prevents the formation of oxide films. Provides a high degree of adhesion of the zinc melt to the metal surface.
3. Drying
Metal products are heated to a temperature of 100 - 120 ° C. Moisture is removed from the surface of the product, and temperature preparation for the galvanizing process takes place.
4. Galvanizing
The galvanizing process is the main technological process of hot galvanizing. It is produced in a zinc melt at a temperature of 450 °C.
5. Cooling
In the process of cooling, the final appearance of the zinc coating of metal products takes place.
6. Zinc coating quality control
The applied zinc coating is subjected to control in appearance and thickness in accordance with GOST 9.307-89, STB ISO 1461-2009.
Gallery (video and photo of the plant, production and products).
The "Konus" plant produces hot-dip galvanizing of products using modern equipment of the Italian company "Gimeko" using the latest technology. Thorough preparation of the steel surface, including degreasing using surfactants, pickling, washing, and fluxing, guarantees European quality coating.
Galvanization is carried out both externally and internally. The high-tech new equipment allows galvanizing of unique structures weighing up to 6 tons after individual processing of the order by technologists. Overall dimensions of the galvanizing bath: (length x width x height) 15 × 1.8 × 3.5 m. The thickness of the zinc coating: from 40 to 200 microns.
The main stages of the process:
1. Reception and suspension of ferrous metal structures
Metal structures must be delivered in batches with steel-grade indications and must meet the required criteria.
2. Chemical preparation of metal structures
2.1 Degreasing
The degreasing process is designed to remove grease stains, oils and other synthetic impurities from the surface of the "black" metal structures that slow down and worsen the etching process.
2.2 Flushing
Rinsing after degreasing is carried out in order to remove fat droplets from metal structures. Prevention of their entry into pickling baths.
2.3 Etching
Preparation of metal surface for galvanizing. The pickling process is designed to remove rust and scale. The surface of the steel is activated without damaging it.
2.4 Flushing
Washing after etching is necessary to remove iron chloride residues from the surface of metal products and to prevent the transfer of hydrochloric acid solution to the fluxing bath.
2.5 Fluxing
The process of applying a protective layer to the surface of metal structures. Prevents the formation of oxide films. Provides a high degree of adhesion of the zinc melt to the metal surface.
3. Drying
Metal products are heated to a temperature of 100 - 120 ° C. Moisture is removed from the surface of the product, and temperature preparation for the galvanizing process takes place.
4. Galvanizing
The galvanizing process is the main technological process of hot galvanizing. It is produced in a zinc melt at a temperature of 450 °C.
5. Cooling
In the process of cooling, the final appearance of the zinc coating of metal products takes place.
6. Zinc coating quality control
The applied zinc coating is subjected to control in appearance and thickness in accordance with GOST 9.307-89, STB ISO 1461-2009.
Gallery (video and photo of the plant, production and products).
Advantages and Innovations
Advantages:
- Maximum weight of one product is up to 6 tons
- Maximum product length up to 14.5 meters
- Zinc coating thickness from 40 microns
- Maximum weight of one product is up to 6 tons
- Maximum product length up to 14.5 meters
- Zinc coating thickness from 40 microns
Stage of development
Already on the market
Sector group
Materials
Retail
Retail
Organization information
Type
Industry SME 50-249
Year established
2012
NACE keywords
C.24.20 - Manufacture of tubes, pipes, hollow profiles and related fittings, of steel
C.32.99 - Other manufacturing n.e.c.
C.32.99 - Other manufacturing n.e.c.
Already engaged in transnational cooperation
Yes
Certification standards
Certifications:
- Certificate of compliance with the requirements of the QMS STB ISO 9001-2015
- Certificate of Compliance with the requirements of STB 18001-2009
- Certificate of Compliance with the requirements of STB 18001-2009
- Certificate of compliance with the requirements of the QMS STB ISO 9001-2015
- Certificate of Compliance with the requirements of STB 18001-2009
- Certificate of Compliance with the requirements of STB 18001-2009
Languages spoken
English
Russian
Russian
Information about partnership
Type of partnership considered
Outsourcing agreement
Subcontracting
Subcontracting
Type and role of partner sought
Customers interested in hot-dip galvanizing services for metal products under a subcontract or outsourcing agreement.
Type and size of partner sought
> 500 MNE
> 500
251-500
SME 51-250
SME 11-50
SME <= 10
> 500
251-500
SME 51-250
SME 11-50
SME <= 10
Attachments
Просмотров: 2227
Статистика ведется с 19.05.2021 22:19:11
Статистика ведется с 19.05.2021 22:19:11